QuickCUBE Solutions | Learning Center

770-901-3200

Home >> Learning Center >>

QuickCUBE Solution

QuickQuote

Rapid Prototyping

Injection Molding

Newsroom

Learning Center

About Quickparts

Learning Center

Custom Manufacturing Blogs

Shore Scale

General Tolerance Calculator

Quickparts Videos

Basics of Injection Molding Design

Quickparts Machining Options

Injection Molding Glossary

Design for Manufacturing Analysis

What Is An STL File?

CAD Tips & Tricks

QuickCUBE Solution

	Step One - First Cross

	Step Two - Bottom Corners

	Step Three - Middle Layer

	Step Four - Top Cross

	Step Five - Top Layer's Middle Pieces

	Step Six - Rotating the Corner Pieces

	Step Seven - Flipping the Corner Pieces

QuickCUBE Solution

Here is a guide to the notation that will be used throughout this tutorial.

            T = Top
            B = Bottom
            FL = Front Left
            FR = Front Right
            BL = Back Left
            BR = Back Right

When a letter is presented without an apostrophe (‘), turn that side of the QuickCUBE 90 degrees clockwise. If a letter is presented with an apostrophe (‘) then turn that side of the QuickCUBE 90 degrees counter-clockwise. For example, the directions might say (FL BR FL’). This means turn the Front Left side clockwise, turn the Back Right side clockwise, turn the Front Left cube counter-clockwise. Each side is rotated as if you're looking at that side! There will be pictures to help you with each step.